Single Coil Pickups

All ReWind single coils are designed to sound amazing, taking lessons learned from vintage pickup manufacturing and applying them in a way to fit todays guitars, players, rigs, and situations. All single coils are made of top quality parts. Many parts are proudly made in-huose at ReWind, and other parts are always U.S. sourced when possible.

All ReWind pickup sets are available in three levels of aging:
"New & Polished" - Brand new looking, shiny, and polished with no artificial aging.
"Lightly Aged Covers" - Slightly dulled and scuffed polished covers showing a couple years of moderate play wear.
"Vintage Pulls Series" - These look just like pickups pulled from a 50 year old and played guitar to the absolute finest detail, inside and out. Custom aging requests can be accomodated, as well.

Sets sold in pairs. For single pickups or sets of 3 or more pickups, please contact ReWind to be invoiced.

Build time for single coils is generally under 15 days.


Buckhummer "Cool" Set Buckhummer Buckhummer

Aging Options
Cover Options

P-90s under the hood of a humbucker size frame. Wound with actual 42AWG plain enamel with the coil geometry and wind pattern of a real vintage P-90 coil. They said it couldn't be done, but these do in fact have proper P-90 coils wound on actual P-90 bobbins which then have the outer flanges cut off after winding. Jammed in a humbucker-sized package these truly fit normal humbucker rings and routes. These use the same rough sand cast magnets and pole screws as the ReWind Electric vintage-style humbuckers, dogears and soapbars.

Full, clear, detailed, powerful, articulate and dynamic. This set represents the classic early 1950's lower output A3 side of vintage P-90 design.

Available with gold, nickel or black enamal metal humbucker size covers or black or cream plastic covers. Also available in Dogear and Soapbar configurations with black, cream, or nickel plated nickel-silver dogear covers.

DCR:
About 7.25k / 7.5k Ohms

Magnets:
Two Custom Cast & Processed Extra Large 1950's Style AlNiCo III Bar Magnets

 


Buckhummer "Hot" Set Buckhummer Buckhummer

Aging Options
Cover Options

P-90s under the hood of a humbucker size frame. Wound with actual 42AWG plain enamel with the coil geometry and wind pattern of a real vintage P-90 coil. They said it couldn't be done, but these do in fact have proper P-90 coils wound on actual P-90 bobbins which then have the outer flanges cut off after winding. Jammed in a humbucker-sized package these truly fit normal humbucker rings and routes. These use the same rough sand cast magnets and pole screws as the ReWind Electric vintage-style humbuckers, dogears and soapbars.

Tight, aggressive, punchy, warm and pushy with plenty of bark and a snappy middle position. This set represents the hotter A5 P-90s of the late 1950's and early 1960's.

Available with gold, nickel or black enamal metal humbucker size covers or black or cream plastic covers. Also available in Dogear and Soapbar configurations with black, cream, or nickel plated nickel-silver dogear covers.

DCR:
About 7.5k / 8.25k Ohms

Magnets:
A Blend of Two Different Custom Cast & Processed 1960's Style AlNiCo V Bar Magnets

 


Fullerton Set Fullerton Fullerton

Aging Options
Cover Options

Fullertons are somewhat of vintage Southern California style single coil in a humbucker-sized chassis, but a little more full-bodied sounding. They give humbucker-equipped guitars a voice similar to that of a fat-sounding Strat, while maintaining their own acoustic character at the same time. These come with very classy solid (no holes) nickel silver or plastic covers in any of the standarg finish options but can also be made to look just like my vintage-style humbuckers to fool your eyes and ears and maintain the original look of your instrument (modest additional custom charge for dummy pole screws for a PAF-look-alike Fullerton).

DCR:
About 7k / 7.5k Ohms

Magnets:
AlNiCo V Pole Pieces (call or email for other magnet types)

 


All ReWind single coils are designed to sound amazing, taking lessons learned from vintage pickup manufacturing and applying them in a way to fit todays guitars, players, rigs, and situations. All single coils are made of top quality parts. Many parts are proudly made in-huose at ReWind, and other parts are always U.S. sourced when possible.